nmap
Scanning Options
| Nmap Option |
Description |
10.10.10.0/24 |
Target network range. |
-sn |
Disables port scanning. |
-Pn |
Disables ICMP Echo Requests |
-n |
Disables DNS Resolution. |
-PE |
Performs the ping scan by using ICMP Echo Requests against the target. |
--packet-trace |
Shows all packets sent and received. |
--reason |
Displays the reason for a specific result. |
--disable-arp-ping |
Disables ARP Ping Requests. |
--top-ports=<num> |
Scans the specified top ports that have been defined as most frequent. |
-p- |
Scan all ports. |
-p22-110 |
Scan all ports between 22 and 110. |
-p22,25 |
Scans only the specified ports 22 and 25. |
-F |
Scans top 100 ports. |
-sS |
Performs an TCP SYN-Scan. |
-sA |
Performs an TCP ACK-Scan. |
-sU |
Performs an UDP Scan. |
-sV |
Scans the discovered services for their versions. |
-sC |
Perform a Script Scan with scripts that are categorized as "default". |
--script <script> |
Performs a Script Scan by using the specified scripts. |
-O |
Performs an OS Detection Scan to determine the OS of the target. |
-A |
Performs OS Detection, Service Detection, and traceroute scans. |
-D RND:5 |
Sets the number of random Decoys that will be used to scan the target. |
-e |
Specifies the network interface that is used for the scan. |
-S 10.10.10.200 |
Specifies the source IP address for the scan. |
-g |
Specifies the source port for the scan. |
--dns-server <ns> |
DNS resolution is performed by using a specified name server. |
Output Options
| Nmap Option |
Description |
-oA filename |
Stores the results in all available formats starting with the name of "filename". |
-oN filename |
Stores the results in normal format with the name "filename". |
-oG filename |
Stores the results in "grepable" format with the name of "filename". |
-oX filename |
Stores the results in XML format with the name of "filename". |
| Nmap Option |
Description |
--max-retries <num> |
Sets the number of retries for scans of specific ports. |
--stats-every=5s |
Displays scan's status every 5 seconds. |
-v/-vv |
Displays verbose output during the scan. |
--initial-rtt-timeout 50ms |
Sets the specified time value as initial RTT timeout. |
--max-rtt-timeout 100ms |
Sets the specified time value as maximum RTT timeout. |
--min-rate 300 |
Sets the number of packets that will be sent simultaneously. |
-T <0-5> |
Specifies the specific timing template. |
Any feedback and suggestions are welcome. This website was created using mkdocs and the material plugin. If you
want, you can make a pull request. The repository is https://github.com/dabonzo/itsec_hp